VW Key Battery Change

Change of VW key battery? Here on this website, you can learn all about the VW key battery change process and the tools that you need to use to complete the changing process successfully! This manual includes videos and step-by-step directions for changing the battery in any VW key fob. You must scroll down until you locate the image and video that correspond to your VW key.

You may find a how-to video and detailed instructions for changing the battery in one of the most widely used Volkswagen keys fobs below. From 1999 to 2011, this remote was used on numerous VW vehicles, including the Jetta, Golf, GTI, EOS, CC, and Bettle. This remote’s buttons deteriorate over time. This key’s shell can be modified. For further information, click the link below.

VW Key Battery Change Instructions

Universal VW key battery change instructions:

1. Push the circular button, then turn the metal key.
2. Then split the key in two with a flat-head screwdriver.
3. Set the portion containing the metal key aside.
4. To unlock the key’s bottom half, use a little screwdriver.
5. Then take off the case’s cover. So the back cover is where the battery is mounted.
6. Take the battery out of the enclosure. Keep in mind how the battery’s positive side is positioned.
7. Put the fresh battery in. Finally, ensure that the back cover is towards the positive (+) symbol.
8. In the end, attach the shell to the back cover.
9. Work the key’s two halves together.

Here on this website, you can use a VW radio calculator that is capable to find your lost radio code! You can recommend our website to your friends that have this type of problem.

Jepp And Golf Instructions

You may find instructions on how to change the battery in the older Volkswagen key used on vehicles like the Jetta and Golf in this section.

1. To pry open the key shell, use a flathead screwdriver.
2. Then divide the shell of the VW key into two halves.
3. Take the outdated battery too out of the circuit board.
4. Finally, place the fresh battery into the device, ensuring sure that the + symbol is on the same side as the old one.
5. In the end, place the key’s two sides together and fasten it.

Passat Instructions

The Proximity Key Fob used in automobiles like the VW Passat B, CC, and other models between 2003 and 2011 has instructions for changing the battery below. There is a transponder chip embedded into this VW key. It has a detachable internal battery and three buttons.

1. To remove the metal emergency key, press the release button near the chrome portion.
2. Then take off the backup key from the key fob.
3. After that, pull the chrome piece away from the key fob by pressing the release button once more.
4. To pry open the shell at the exposed end, use a flat head screwdriver.
5. Then take away the key fob case’s top half. The battery will become visible.
6. Remove the old battery by prying it out with a little screwdriver.
7. Insert the fresh battery by sliding it in and pressing. So make sure the constructive side is upward.
8. Press the case’s two sides together to seal it after replacing the battery.
9. In the end, attach the emergency and chrome parts to the keyfob.

Volkswagen Routan Key Battery Change

Chrysler produced the Volkswagen Routan that was sold in the US. A Chrysler remote is used to operate the Routan. Finally, a video demonstrating how to replace the battery in a Volkswagen Routan can be found on our Youtube page.

1. Turn the key around so that the back is facing you.
2. To remove the back cover, use a tiny flathead screwdriver.
3. Then to pry the battery off, once more use the screwdriver.
4. Finally, attach the back cover and fresh battery.

Using the information from this web page you can complete any VW key battery change process for any possible Volkswagen vehicle!